Mr coffee mpx20 manual




















There are no user serviceable parts. Please read ALL of the instructions in this manual carefully before you begin to use this appliance. Proper care and maintenance will ensure a long life and a trouble-free operation for this appliance. Please save these instructions and refer to them for cleaning and care tips. Welcome and congratulations on the purchase of your new MR.

Your new coffeemaker will wake up with you in the. How you enjoy your MR. A short power supply cord is provided to reduce the hazards resulting from a person or pet becoming entangled in, or tripping over, a longer cord. An extension cord may be purchased and used if care is exercised in its use. If an extension cord is used, the marked electrical rating of the extension cord must be at least 10 amps and volts.

The resulting extended cord must be arranged so that it will not drape over a countertop or tabletop where it can be pulled on by children or tripped over accidentally. This appliance has a polarized plug one blade is wider than the other. To reduce the risk of electric shock, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the plug in any way.

You can customize the length of the power cord so that it is the exact length you desire. To increase the length of the power cord: grasp the power cord not the power plug and gently lift it out of the slot, then pull it away from the coffeemaker. To decrease the length of the power cord: grasp the power cord not the power plug , lift it out of the slot and gently feed it into the coffeemaker.

Lock the cord in the slot when finished. Important Safeguards. Decanter Use and Care. Special Cord Set Instructions. Table of Contents. Parts Diagram. Coffeemaker Features and Benefits. Preparing for Use. Brewing Coffee Now. Brewing Coffee Later Delay Brew.

Cleaning and Maintaining Your Coffeemaker. Troubleshooting Your Mr. Service and Maintenance. Warranty Information. Your new MR. The timer allows you to preset when you would like the coffeemaker to automatically begin brewing your coffee, up to 24 hours in advance. NOTE: If you have selected any of the operating functions, the coffeemaker will act upon the last operation selected if the power is restored within 10 seconds after a power outage.

Make sure your first cup of coffee is as good as can be by cleaning your MR. Just follow these simple steps:. Wash the decanter, decanter lid and the filter basket in a mixture of mild detergent and water. Rinse each thoroughly please refer to the Parts Diagram. Replace all the parts and close the lid. Then, run a brew cycle with water only, without adding coffee and coffee filter. When brewing is complete, turn your coffeemaker off, discard the water in the decanter and rinse the decanter, decanter lid, and filter basket.

Plug the power cord into a standard electrical outlet. The clock will flash on the control panel to indicate that the time has not been set yet. NOTE: Pressing any button before setting the clock will cause the clock to start keeping time from a. You must set the clock if you want to use the Delay Brew feature. The AM or PM indicator is at the left of the clock display. The display will show the time you have programmed the coffee to brew.

For best results, use a level tablespoon for ground coffee measurement. Make sure you use medium grind coffee for a perfect brew. First, look for the MR. If you do not see this symbol, please call To use the water filtration system in your MR. Align the red indicator on the frame to the letter that corresponds with the month that.

This serves to remind you to change the disk every month approx. NOTE: For optimum results, use the water filtration system with a permanent filter. Follow Adding Water and Coffee instructions. When you are done brewing your coffee, rinse the water filter with fresh water. Do not put. To replace the water filter disks, twist the gray disk cover from your water filtration system. Remove the used disk. Insert the new disk into the frame and twist the cover back into place.

Replacement water filtration disks can be purchased online at www. Open the brew basket lid. For your convenience, you can lift out the removable filter basket. Place a MR. NOTE: If using paper filters, it is important that the sides of the filter fit flush against the side of the filter basket. If filter collapse occurs, dampen the filter before placing in the filter basket and adding ground coffee and water. Add the desired amount of coffee and gently shake to level the coffee.

See the. Be sure the removable filter basket is properly centered and all the way down in the brew basket and close the lid. Fill the decanter with cold, fresh water to the desired capacity 1 cup equals 5 ounces For easy and accurate filling, the water markings on the glass decanter and on the water window show the amount of water needed to make the corresponding desired number of cups. The amount of coffee brewed will always be slightly less than the amount of water poured in the water reservoir.

This is due to the minimum absorption of water by the coffee grounds. Lift the pour through reservoir lid and pour the water into the water reservoir.

Close the lid and place the empty decanter onto the warmer plate. NOTE: Make sure the decanter is fully placed on the warming plate or the water and the grounds will overflow from the filter basket. An overflow may cause personal injury or damage to property.

Use on a hard, flat surface only to avoid interruption of air flow underneath the appliance. A short power supply cord is provided to reduce the hazards resulting from becoming entangled in or tripping over a longer cord. An extension cord may be purchased and used if care is exercised in its use. If an extension cord is used, the marked electrical rating of the extension cord must be at least 10 amps and volts. The resulting extended cord must be arranged so that it will not drape over the counter top or table top where it can be pulled on by children or tripped over accidentally.

To reduce the risk of electric shock, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the plug in any way. Cord Storage. Do not immerse your appliance in water. This may permanently damage the product and void the warranty. You may use milk or water, syrup or cocoa powder mix. Note: Do not plug your machine in until all ingredients have been added and the lid is in place in the closed position.

The ingredients used below produce four 8-ounce servings. Refer to the Ingredient Chart to determine usage for other serving sizes. Put the magnetic mixing disk in place.

Add 4 scoops 8 Tbsp. Use 7 scoops or 14 Tbsp. Place the lid onto the reservoir. Turn lid to cover the spout. Plug in the Hot Chocolate Maker. Your machine will begin to mix and heat the hot chocolate. When the hot chocolate reaches the perfect temperature, the unit will automatically shut off a full batch will take approximately 10 minutes. Unplug the machine after it shuts off. This will lock the lid for ease of pouring.

Scoop provided equals 2 Tbsp. A full batch 32 oz. Pour out any remaining hot chocolate from the reservoir. Remove the magnetic mixing disk. Wash the interior by pouring a combination of a mild detergent and water into the reservoir and wipe clean with a soft damp cloth.

Do not use any abrasive detergents or scouring pads, as this will scratch the plastic which can lead to breakage. Wash the lid and mixing disk with a mild detergent and water.

Wipe the exterior of the machine with a damp cloth. Welcome to ManualMachine. We have sent a verification link to to complete your registration. Log In Sign Up. Forgot password? Enter your email address and check your inbox. Please check your email for further instructions. Enter a new password. Do not use outdoors. Operation and Use



0コメント

  • 1000 / 1000