The 2nd rule of painting aluminum window frames is thin coats of material. Whether primer or paint, keep it thin. This is true of any window painting, but especially true with metal window trim. The beauty of the aerosol primer is that it goes on very thin and even, which is the way paint performs best — thin coats allowed to dry properly. After your primer dries, check your windows for caulking opportunities.
Remember to keep it thin. Brushing is fine, spraying is better; again, aerosols are great if you can find the right color. If not, you can spray your trim paint using a cup gun or airless sprayer with a small tip. Cover any areas that you don't want painted with masking tape. If you need to mask off a large area, cover it with paper or plastic sheeting first, then secure the edges with masking tape. Find a well-ventilated area to work in. While you can brush paint onto aluminum, you have to spray the primer on.
The aerosol cans that paints and primers come in release fumes, which can cause headaches and lightheadedness. Outside would be the best option, but if you can't work there, choose a large room with good ventilation and open windows.
A respirator mask is a must. Do not paint if it is raining or humid outside, as this can affect the curing process. Spray an even coat of self-etching primer onto the aluminum. Shake the can for about 30 to 60 seconds first, then hold it about 8 inches 20 cm from the surface. Spray on a light, even coat using overlapping strokes. You can spray side-to-side or up-and-down. Overlap each stroke ever so slightly to ensure that you are covering the surface evenly.
If your can has a different set of application instructions, you should follow those instead. If you are working with a multi-sided object, let the first side dry to the touch before priming the other sides. Let the primer dry for 15 minutes before adding a second coat. Check the can again to find out exactly how long you should wait before applying a second coat. Most primers will have a "between coats" drying time and a curing time. Refer to the "between coats" time for this.
In most cases, you'll have to wait between 5 and 15 minutes. Add 2 to 3 more coats, then wait about 1 hour for the primer to cure. Again, check your can to find out exactly how many coats of primer you should use and how long you should wait for it to cure. In most cases, you'll need about 3 to 4 coats of primer and wait about 1 hour for it to cure.
If you don't wait long enough, the paint and primer may peel. Double-check the instructions on the can for more specific curing times. Remember to apply light coats of primer. This will help it cure properly. If you slap on a thick coat, the primer may go tacky or just peel off. Buff away imperfections with grit sandpaper, if needed. Once the primer has cured, take a close look at it.
If you like the finish, you are ready to move on. If it looks rough, pitted, or drippy, lightly buff the surface with grit sandpaper. Double-check the masking tape after this. If the edges look frayed, peel it off and lay down new strips. Part 3. Buy acrylic or latex paint. For best results, choose paint with a matte or satin finish. While glossy paint will work, it is not recommended because it will show off any imperfections in the metal.
Because you already applied the primer, you can use any type of paint you want. It does not have to be labeled "for metal. Brush or spray on a light, even coat of paint. This is important, regardless of the type of paint you are using: brush-on or spray-on. Just like with the primer, apply the paint using straight, overlapping strokes. They can be horizontal or vertical, but they all need to go in the same direction.
If you are using brush-on paint, use a flat, wide paintbrush may from synthetic fibers. Avoid soft camel hair or stiff boar bristle.
If you're using spray paint, shake the can for about 1 minute first, then hold it about 8 inches 20 cm from the surface while spraying it. For a multi-sided object, start with the top and sides. Once the paint feels dry, move onto the bottom. Wait about 15 minutes for the paint to dry to the touch.
How long you wait for the paint to dry depends on what type of paint you are working with. In general, you'll only have to wait 5 to 15 minutes. You don't have to wait for this coat of paint to cure because you'll be adding more coats. Double-check the paint can to see how long you should wait for the paint to dry between coats. Add up to 3 more coats of paint, allowing each one to dry for 15 minutes. Once the previous coat of paint feels dry, you can apply the next coat. Refer to the paint can to find out how many coats of paint you should, and how long you should wait between coats.
In most cases, you'll need at least 2 coats of paint. Let the paint dry and cure completely, about 24 to 72 hours. Again, how long this takes depends on the type of paint you are working with. If your can of paint has both a drying time and a curing time, you should follow the curing time. Drying and curing are too different things.
This can take anywhere from 24 to 72 hours. Just because something feels dry to the touch does not mean that it's dry underneath. Once paint has cured, you can be sure that it's dry all the way through. So, before you dive into painting aluminum on your own, keep reading to learn how to get the best paint job out of it! Painting aluminum does require a few extra steps in the prep stages to yield the best results. For instance, you'll need to start by sanding your aluminum in order for the paint to adhere to the bare aluminum surface.
This can be accomplished with medium-grit sandpaper to help "scuff" the surface. Then you'll follow up with an etch primer that will offer a solid base coat so your paint will stick to the aluminum surface. This will give you a high-performance paint job that will stay durable in all weather conditions.
If you want even more durability, though, we recommend finishing it off with a sealer or topcoat and letting it air dry for at least a full 24 hours.
This will ensure that the paint has fully stuck to the surface and is set in place before it's put to the test! Luckily, most of these supplies are available at hardware stores and they're all fairly easy to apply. Before you get started on painting aluminum, there are a few supplies you'll want to collect in order to get the best finish possible.
First off, you need to use a painting respirator if you're dealing with spray paints, self-etching-primers, and top coats. All of these can be harmful to your health if you come in direct contact with them, so make sure you take proper safety precautions. DO NOT use any of these spray paints or primers inside as they will create toxic chemicals in the air.
Finally, you'll want to collect some other basic items like sandpaper and an old rag or cloth that will help you prep your aluminum surface for paint.
If you're looking to do a DIY home decor project, spray painting aluminum is probably best for you. Before you get started with spray paint, you'll need to sand down the bare aluminum surface by giving it a nice scuff. This will make the surface rough enough to make sure the spray paint will stick to it. You don't need to go crazy with this, just add a bit more texture to make the next steps a lot smoother.
Now, you'll take a cloth or old rag and rub off all the dust and dirt that step 1 created so you can prevent the spray paint from slipping off or going on unevenly. We want to get the surface clean from debris so that all those scuffs you made will actually get a chance to absorb the paint. Next, it's time for the self-etching primer that will really create a smooth, durable surface for our spray paint.
For this step, you may need to get a bit creative with how you're holding your item s up while you spray them. We highly recommend doing this outside in a temporary paint booth to prevent the spray paint from getting on your surfaces inside, but also to keep the toxic spray paint chemicals out of your home. You'll want to apply layers of this primer, letting it rest for about 5 minutes between coats, to get the best effect. Now it's time for the fun part: the spray paint! When it comes to spray painting metal, we highly recommend any of Rust-Oleum's paints, but specifically, their metallic colors , which tend to offer amazing finishes on a multitude of surfaces.
No matter which spray paint you're using, though, for this step you want to take extra caution to not get the paint on any other surfaces and to protect your lungs from the fumes. Generally, you'll want to do coats to get the best finish that will be less prone to flaking or wear-and-tear. Finally, you'll want to set the spray-painted item in a safe, dry place for at least 24 hours to make sure the paint has time to fully set before it comes into contact with anything.
Though this step is entirely optional, we recommend making it a MUST if you're working with an item that will see heavy use or be outdoors.
0コメント